vehicle Size |
1875*1100*1160mm |
| wheelbase |
1230mm |
| height of the seat |
830mm |
| ground clearance |
250mm |
| turning diameter |
6000mm |
| wading depth |
350mm |
| toe in |
35mm |
| extroversive angle |
0º |
| tread |
820mm |
| main mass parameter |
|
| vehicle net mass(without battery) |
178kg |
| vehicle whole mass(with battery) |
190kg |
| main performance parameter |
|
| security parameter |
|
| brake performances accorde with the following requirements |
a）Brake distance： ≤7m (first speed: 60km/h)
b) brake strength：
1)front wheel： ≥660N
2)rear wheel ： ≥825N
3)stationed brake strength: ≥400N |
| maximum noise accordes with the following requirement |
Speedup noise ≤80dB (A)
Fixation exhaust noise ≤82 dB (A) |
exhaust pollutants accorde with the following requirements
factory condition standard |
carbon monoxide (CO) thickness: ≤ 7.0g/km
hydrocarbon (HC) thickness： ≤1.5g/km
nitrogen oxide (NOX) thickness： ≤0.4g/km |
| other performance parameter |
|
| startup performance |
≤15s |
| maximum speed |
≥95km/h |
| speedup performances accorde with the following requirements |
Start speedup： ≤14s
Exceeding speedup： ≤13s |
| climbing angle |
≥22° |
| structure model and parameter of other motorcycle parts |
|
| treading system |
|
| tyre specification |
front wheel AT21*7-10
rear wheel AT20*10-9
vacuum tyre |
| tyre pressure |
front wheel 25kpa
rear wheel 25kpa |
| felloe specification |
front：alnico/steel ring
rear：alnico/steel ring |
| shock absorber model |
front：hanging hydraulic spring
rear ：wish bone hydraulic spring |
| arrester model |
front：double disc/ handle brake
rear : single disc/ foot control |
| disc brake hydraulic oil specification |
DOT4 |
| turing control system |
direction handlebar |
| driven style |
two wheeled driven |
| wish bone style |
double wish bones |
| stationed brake |
mechanical |
| chain |
520 oil seal roller chain,98 knuckles |
| chain wheel |
520 model,38 teech |
| frame |
steel tube structure |
| fuel capacity |
9.0L |
| standby fuel |
2.7L |
| electronic meter system |
|
| magneto motor model |
flywheel rotor direct current |
| battery specification |
12V 8Ah |
| spark plug model |
DR8EA(NGK) |
| spark plug clearance |
0.6-0.7 mm |
| front light |
12V 30W/30W*2 |
| rear light |
12V.5W/21W*1 |
| neutral gear indicator specification |
12V. 1.7W*1 |
| gear indicator specification |
12V. 1.7W*1 |
| fuse speicfication |
15 A |
| engine model and parameter |
|
| engine model/brand |
ASAI83FMP |
| type |
single cylinder,upright,oil cooling,4stroke |
| bore*stroke |
83mm*64.5mm |
| compression ratio |
9.2:1 |
| cylinder capacity |
349ml |
| maxium power and rotate speed |
19kW (7000r/min- 7500r/min) |
| rated power and rotate speed |
18kW (7500r/min) |
| maximum torque and rotate speed |
26N·m （6000r/min） |
| minimum stable rotate speed |
1500±150r/min |
| clutch model |
wet,frictional |
| output style |
chain drive |
| shift model |
6 gearshifts non-cycle (6 gears+reverse gear) |
| ratio |
|
| first gear transmission ratio |
2.685 |
| second gear transmission ratio |
1.969 |
| third gear transmission ratio |
1.504 |
| fourth gear transmission ratio |
1.239 |
| fifth gear transmission ratio |
1.065 |
| sixth gear transmission ratio |
0.946 |
| reverse gear |
6.806 |
| minimum fuel consumption ratio |
≤330g/KW·h(6000r/min) |
| petrol model |
accorde with GB 17930-1999 standard (lead-free petrol) |
| crankcase lubricant |
accorde with GB11121-1995 standard.and adopt suitable model SAE 5W-40 or SAE 10W-30 (in winter and in cold arear) SAE.20W-40 (in spring and summer season) according to temperature changes |
| lubricant capacity |
2.50L |
| ignition style |
CDI electronic ignition |
| carburetor model |
PD36G |
| lubricating style |
splash, pressure |
| engine net weight |
50kg |
